IT-JAP80M

Review (0)

Power (HP): 0,75
Power (KW): 0,55
Head min. (Mt.): 29
Head max. (Mt.): 39
Capacity min Q. (Lt/Min.): 5
Capacity max Q. (Lt/Min.): 35
DNA: 1" 1/4
DNM: 1"
Pump weight (Kg): 15,2 (brass impeller) / 14,6 (noryl impeller)
Voltage: single phase 230/240 V - 50 Hz

Impeller material :

Color :

Volume discounts

Quantity	Discount	You Save
5	5%	Up to €66.49
10	10%	Up to €265.96
20	15%	Up to €797.88
40	25%	Up to €2,659.60
50	35%	Up to €4,654.30
100	45%	Up to €11,968.20

Delivery time

1 - 10 pieces: 7/10 days, transport included;
11 - 50 pieces: 15 days, transport included;
51 - 100 pieces: 25 days, including transport;
over 100 pieces: estimated 30 days.

All products are made in Italy and are produced, assembled and checked with the identification serial number placed on the accompanying booklet and reserved for the customer-order number.

REQUEST FOR QUOTATION

Politiche per la sicurezza (modificale con il modulo Rassicurazioni cliente)
Delivery time 6 weeks All products are made in Italy and are produced, assembled and checked with serial number
Politiche per i resi merce (modificale con il Modulo rassicurazioni cliente)

Accessori da avere assolutamente

Accessori

	Vertical pressure tanks EPDM interchangeable membrane.	Vertical pressure tanks EPDM interchangeable membrane
	Horizontal pressure tanks EPDM interchangeable membrane	Horizontal pressure tanks EPDM interchangeable membrane
	EPDM membrane for pressure tanks	EPDM membrane for pressure tanks
	They perform the function of automatic control of pressure energy levels by acting on the power supply of the electric pump. They are previously calibrated at standard closing and opening contact pressures, but can be calibrated at different pressures thanks to their adjustment device.	SQUARE D FSG 2 pressure switch
	Electronic control switch detecting flow and pressure 12A	Electronic control switch detecting flow and pressure 12A BRIO 2000 M
	Pressure switches for water installations Phase: single-phase Pressure: 1-5 bar	Pressure switch IT-PM5
		Pressure gauges
		Brass connectors
		Flexible hoses

SCOPE OF APPLICATION: Single impeller electropumps (JAP 80-100 M-T) or double impeller (JAP 150-200-300 M-T) with axial intake and upward-facing radial delivery. The main feature of this model is the very high suction capacity reachable with a correct installation of the ejector body. They are particularly suited in all the cases it is needed to effect suctions to depths between 10 mt and 50 mt. It is recommended that these pumps are used to carry only chemically pure liquids and free of foreign matters, with temperatures not higher than 45°C. The pump must absolutely not be allowed to run dry in order to avoid irreversible deformations to the components in plastic.

PUMP: Horizontal axis pump with bronze impellers (Noryl impellers are available on request), pump body, ejector body and motor bracket made of G20 cast iron, stainless steel shaft, diffuser set and ejector in Noryl, bronze nozzle and mechanical seal made of ceramic/graphite.

MOTOR: Electric, closed-type with external cooling fan, IP 44 safety class. F insulation. The standard version of single-phase motor is fitted with termostat-controlled safety microswitches to avoid undesirable damages to the motor. The user must provide protection for three-phase electropumps.

TENSION: JAP 80-100-150-200-300 M: 230-240 V 50 Hz; JAP 80-100-150-200-300 T: 230/400 V 50 Hz. Different voltage and frequency ratings are available on request.

APPLICATIONS: Domestic, Irrigation.

Reference IT-JAP80M

Data sheet