assistant_photo
E-commerce for Electric motors and water pumps
assistant_photo
E-commerce for Electric motors and water pumps
24/7 support +39 0444 1241463
IT-PM2
Power (HP): 0,5
Power (KW): 0,37
Head min. (Mt.): 4
Head max. (Mt.): 35
Capacity min Q. (Lt/Min.): 5
Capacity max Q. (Lt/Min.): 40
DNA: 1"
DNM: 1"
Pump weight (Kg): 5,8
Voltage: single phase 230/240 V - 50 Hz
-
Politiche per la sicurezza (modificale con il modulo Rassicurazioni cliente)
-
Delivery time 6 weeks
All products are made in Italy and are produced, assembled and checked with serial number
-
Politiche per i resi merce (modificale con il Modulo rassicurazioni cliente)
Accessori da avere assolutamente
Accessori
Vertical pressure tanks EPDM interchangeable membrane. |
Vertical pressure tanks EPDM interchangeable membrane
|
|
Horizontal pressure tanks EPDM interchangeable membrane |
Horizontal pressure tanks EPDM interchangeable membrane
|
|
EPDM membrane for pressure tanks |
EPDM membrane for pressure tanks
|
|
They perform the function of automatic control of pressure energy levels by acting on the power supply of the electric pump. They are previously calibrated at standard closing and opening contact pressures, but can be calibrated at different pressures thanks to their adjustment device. |
SQUARE D FSG 2 pressure switch
|
|
Electronic control switch detecting flow and pressure 12A |
Electronic control switch detecting flow and pressure 12A BRIO 2000 M
|
|
Pressure switches for water installations |
Pressure switch IT-PM5
|
|
|
Pressure gauges
|
|
|
Brass connectors
|
|
|
Flexible hoses
|
SCOPE OF APPLICATION: Radial impeller pumps with axial intake and upward-facing radial delivery. The main feature of these pumps is that they are capable of generating a medium-high discharge head with a relatively modest power consumption. These pumps are particularly suited for pumping up and distributing water in domestic water supply systems in houses, villas, small properties and gardens, as well as for providing water supply to high pressure water heating systems. It is recommended that these pumps are used to carry only chemically pure liquids and free of foreign matters, with temperature not higher than 80°C.
PUMP: Horizontal axis pump with bronze impeller, pump body and base support made of G20 cast iron, AISI 416 stainless steel shaft and mechanical seal, made of ceramic/ graphite.
MOTOR: Electric, closed-type with external cooling fan, IP 44 safety class. F insulation. The standard versions of single-phase motors are fitted with termostat-controlled safety microswitches to avoid undesirable damages to the motor. The user must provide protection for three-phase electropumps.
TENSION: PM: 230-240 V. 50 Hz; P: 230/400 V. 50 Hz. Different voltage and frequency ratings are available on request.
APPLICATIONS: Domestic, Irrigation, Fountains, Industry
IT-PM2
Data sheet
- Power (HP)
- 0,5
- Power (kW)
- 0,37
- Head min (Mt.)
- 4
- Head max (Mt.)
- 35
- Capacity min Q. (Lt/Min.)
- 5
- Capacity max Q. (Lt/Min.)
- 40
- DNA
- 1"
- DNM
- 1" 1/4
- Pump weigth (Kg)
- 5,8
- Voltage
- Singlephase 230/240 V - 50 Hz
Specific References
No customer reviews for the moment.
2 other products in the same category:
Power (HP): 0,5
Power (KW): 0,37
Head min. (Mt.): 4
Head max. (Mt.): 35
Capacity min Q. (Lt/Min.): 5
Capacity max Q. (Lt/Min.): 40
DNA: 1"
DNM: 1"
Pump weight (Kg): 5,8
Voltage: single phase 230/240 V - 50 Hz