assistant_photo
E-commerce for Electric motors and water pumps
assistant_photo
E-commerce for Electric motors and water pumps
24/7 support +39 0444 1241463
IT-SA1C
Power (HP): 0,75
Power (KW): 0,55
Head min. (Mt.): 9,5
Head max. (Mt.): 14,7
Capacity min Q. (Lt/Min.): 40
Capacity max Q. (Lt/Min.): 160
DNA: 1" 1/2
DNM: 1" 1/4
Pump weight (Kg): 13,1
Voltage: three phase 230/400 V - 50 Hz
-
Politiche per la sicurezza (modificale con il modulo Rassicurazioni cliente)
-
Delivery time 6 weeks
All products are made in Italy and are produced, assembled and checked with serial number
-
Politiche per i resi merce (modificale con il Modulo rassicurazioni cliente)
Accessori da avere assolutamente
Accessori
Vertical pressure tanks EPDM interchangeable membrane. |
Vertical pressure tanks EPDM interchangeable membrane
|
|
Horizontal pressure tanks EPDM interchangeable membrane |
Horizontal pressure tanks EPDM interchangeable membrane
|
|
EPDM membrane for pressure tanks |
EPDM membrane for pressure tanks
|
|
They perform the function of automatic control of pressure energy levels by acting on the power supply of the electric pump. They are previously calibrated at standard closing and opening contact pressures, but can be calibrated at different pressures thanks to their adjustment device. |
SQUARE D FSG 2 pressure switch
|
|
Electronic control switch detecting flow and pressure 12A |
Electronic control switch detecting flow and pressure 12A BRIO 2000 M
|
|
Pressure switches for water installations |
Pressure switch IT-PM5
|
|
|
Pressure gauges
|
|
|
Brass connectors
|
|
|
Flexible hoses
|
SCOPE OF APPLICATION: Opened impeller pump with axial intake and upward-facing radial delivery. These pumps feature high flow rate values and medium-low discharge heads and are particularly suited for pumping up unclean water, with temperature not higher than 80°C. The opened impeller allows any solid matter up to 8 mm. in diameter to pass through without causing any damage to the pump.
PUMP: Horizontal axis pump with bronze impeller (SA/SAM 1C-1-2) or cast iron (SA/SAM 1/A-2/A), pump body and base support made of G20 cast iron, AISI 416 stainless steel shaft and mechanical seal made of ceramic/graphite.
MOTOR: Electric, closed-type with external cooling fan, IP 44 safety class. F insulation. The standard versions of single-phase motors are fitted with termostat-controlled safety microswitches to avoid undesirable damages to the motor. The user must provide protection for three-phase electropumps.
TENSION: SAM: 230-240 V. 50 Hz; SA: 230/400 V. 50 Hz. Different voltage and frequency ratings are available on request.
APPLICATIONS: Irrigation, Agriculture, Industry
IT-SA1C
Data sheet
- Power (HP)
- 0,75
- Power (kW)
- 0,55
- Head min (Mt.)
- 9,5
- Head max (Mt.)
- 14,7
- Capacity min Q. (Lt/Min.)
- 40
- Capacity max Q. (Lt/Min.)
- 160
- DNA
- 1" 1/2
- DNM
- 1" 1/4
- Pump weigth (Kg)
- 13,1
- Voltage
- Three-phase 230/400 V - 50 Hz
Specific References
No customer reviews for the moment.
11 other products in the same category:
Power (HP): 0,75
Power (KW): 0,55
Head min. (Mt.): 9,5
Head max. (Mt.): 14,7
Capacity min Q. (Lt/Min.): 40
Capacity max Q. (Lt/Min.): 160
DNA: 1" 1/2
DNM: 1" 1/4
Pump weight (Kg): 13,1
Voltage: three phase 230/400 V - 50 Hz